Ametal Lift Systems ARIES 250 MR-D Drum Lift System

ARIES 250 MR-D Drum Lift System is a complete Ametal Aries lift solution prepared for professional elevator contractors, project designers and B2B buyers who need a technically defined system rather than a generic component list. The model is described in the PDF as a drum lift system with bottom-of-shaft machine room, and its main application is buildings with strongly constrained shaft dimensions and insufficient headroom. The technical data gives the installer a clear starting point for shaft evaluation: minimum headroom is 2600 mm, minimum pit depth is 200 mm, rated speed is max. 0.63 m/s, and the stated rated load is 100 / 180 / 225 / 300 / 375 kg. This makes the product suitable for early-stage feasibility checks, tender preparation, modernization studies and compact project planning where every millimetre of shaft space matters. The system type is Passenger lift system with bottom-of-shaft machine room, with machine-room information specified as Machine Roomless. According to the table, the application class is Passenger Lift, while the car internal height is 2000 mm. The door configuration is listed as Semi Automatic or Telescopic Single Side or Central Opening, with clear opening values of 600 / 700 / 800 mm. The maximum number of stops is 10 and the maximum travel is 30 m, so the project team can determine whether the model fits the building before moving to final engineering. From an elevator engineering perspective, the value of ARIES 250 MR-D is its packaged concept: car, frame, door arrangement, shaft dimensions and compliance references are presented together, reducing coordination time between the supplier, installer and consultant. The design should be considered especially useful where fast installation, controlled logistics, predictable technical documentation and compact shaft adaptation are important. The applicable standards shown in the PDF are ISO 8100-30, EN81-70, EN81-21, EN81-58; no additional certification or performance value has been added beyond the document. For export-oriented procurement, the model can be presented as an Ametal Lift Systems unit supplied in wooden box packaging with T/T Swift or Letter of Credit payment terms. Technical Table Technical Item: Value Minimum Headroom: 2600 mm Minimum Pit Depth: 200 mm Rated Speed: max. 0.63 m/s Rated Load: 100 / 180 / 225 / 300 / 375 kg Number of Persons: 1 / 2 / 3 / 4 / 5 Machine Room: Machine Roomless Class: Passenger Lift Max. Car Area: 0.37 / 0.58 / 0.70 / 0.90 / 1.10 m² Car Internal Height: 2000 mm Car Types: Passenger cabins Door Type: Semi Automatic or Telescopic Single Side or Central Opening Car Entrances: 1 Entrance or 2 Entrances at 180° Door Clear Opening: 600 / 700 / 800 mm Door Clear Height: 2000 / 2100 mm Max. Stops: 10 Max. Travel: 30 m Applicable Standards: ISO 8100-30, EN81-70, EN81-21, EN81-58